The cloth feeding combination device is composed of a cloth feeding frame, a widening centering device, a rolling car, a speed synchronization device, and a photoelectric weft straightening device (op
The tension-free dryer uses the completely tension-free strong hot air beating and rubbing method to dry and dry the fabric, so as to achieve a good shrinkage effect and loosening effect, and make the
1 . Regularly check the heat transfer oil pipeline in the oven. For example, if there is oil leakage, it should be dealt with in time; after the shift, the flying waste in the machine should be cleane
1. After driving, check whether the mechanical, electrical, instrumentation and safety guards are in good condition. Set the temperature according to the process requirements, then turn on the circula
In daily life, people need to use the knitted fabric heat setting machine for the work of setting clothes , and the setting machine can use the heat transfer oil to heat the air existing in the settin
When carrying out the setting work of textile products, consumers often choose to use the setting machine for the corresponding setting work. When the setting machine is manufactured, there are feedin
The setting machine can use heat transfer oil to heat the air existing in the setting machine when it is working, and use the heat generated in the heating work to heat the fabric. When the textile is
Air-to-Air Heat Exchange The first method is to recover heat energy from the waste heat gas discharged from the setting machine
During the normal use of the heat transfer oil setting machine, a series of physical and chemical changes will occur after the heat carrier heat transfer oil is used for a long time, such as viscosity
Whether there is a temperature difference before and after the oven of the tenter setting machine?
1 . Before shutdown, the cooling should be notified to the heat transfer oil furnace room. Then stop the operation of the circulating fan, open the door to cool down, and run the main engine and the t
