In daily life, people need to use the knitted fabric heat setting machine for the work of setting clothes , and the setting machine can use the heat transfer oil to heat the air existing in the setting machine when it is working, and use the heat generated in the heating work. To achieve the work of heating the fabric, when the fabric is heated at a certain temperature for a period of time, the structure of the fabric itself will change, so that the change in the structure can be used to achieve the purpose of shaping the fabric. However, when the setting machine is used to set the textile surface, it is inevitable that defects will occur. What are the reasons?
crumpling
In the case of edge wrinkling under normal conditions during the setting work of the textile surface, the tension of the textile surface entering the device can be increased, so that the textile surface can enter the device when the longitudinal wrinkle is straight. Tension is reduced. For some loose fabrics of textiles and the softness of the reworked cloth itself, the requirements for working on the material trough and material surface are very low.
latitude shift
In the overfeeding technology applied to the textile surface, the rotating speed of the machine will be reduced during the rotation. Using the edge suction device may cause the edge suction clip to open up. If there are rotten edges, weft skew, etc. during work, the machine can be adjusted corresponding to the weft preset twill type organization, and the internal texture is faster in the opposite direction compared to the preset.
https://www.sunwinmachinery.com/
