When carrying out the setting work of textile products, consumers often choose to use the setting machine for the corresponding setting work. When the setting machine is manufactured, there are feeding parts, weft straighteners, chains and other devices that must be used by the setting machine for normal work. The chemical material system and the oil furnace heating system are two very important components of the fixing machine itself. So in the process of working on the setting machine, what are the roles of the various internal structures in it?
feeding part
The feeding work of the setting machine usually uses a relatively simple structure. This structure is composed of a trough and a roll. The chemical material in the trough often needs to be wetted with textiles, and then passed through the uniform roll. After the work, enter the oven to carry out the corresponding shaping work. This work is also an important condition for high-quality finishing work on the textile itself.
weft adjuster
Under normal circumstances, the weft adjuster configured by the setting machine itself is a photoelectric weft adjuster. This photoelectric weft adjuster itself is equipped with four sets of sensors, and the sensor is also equipped with two parts: light-emitting and photosensitive. The action part of the setting machine when it is working is assembled by the hydraulic system during the manufacture. When the signal of the weft and slant is displayed on the control panel during the work, the control panel will send out commands correspondingly to drive the hydraulic pressure. The system adjusts the corresponding angle, so that the angle of the weft skew can be corrected.
https://www.sunwinmachinery.com/
