Setting time is another major process condition for heat setting. After the fabric enters the heating zone, the time required for heating and setting can be roughly divided into the following parts:
Temperature is the main factor affecting the quality of heat setting.
The stenter setting machine is equipped with PLC programmable logic control, which can fully control and complete the whole setting process. The Chinese operation layout of man-machine dialogue enable
The stenter setting machine can be widely used in the finishing process of woven fabrics, knitted fabrics and other textiles. The equipment has a wide range of functions, strong stability and reproduc
The stenter setting machine, the chain runs without oil lubrication. Each of the amplitude-modulating screw rods is adjusted by an independent motor; the oven, two axial fans are controlled by AC moto
The stenter setting machine combines air supply and exhaust with automatic air flow control to achieve the lowest energy consumption; the high efficiency of the nozzle system enables the fabric to hav
The stenter setting machine, pneumatically control the lifting and lowering of the insulated door panel, only need a button, and it is easy to operate. The door closes automatically, with a thickness
Since 2000 , our Xinwen began to build the brand "SUNWIN" for many years to produce high-quality textile finishing machine series, through continuous technological innovation and quality improvement
The best thermal energy display, the high-power heat dissipation design, the best mechanics principle, the powerful fan performance, and the perfect nozzle system constitute the excellence of the BSD
The characteristics of the pre-shrinking dryer: It is completely tension-free and can fully adjust the overfeeding device. The cloth being fed is not hit by a strong hot air hammer. On the one hand, i
The high-efficiency, low-energy shrinkage dryer feeds the fabric into the mesh conveyor belt. A bit overfeeding when feeding cloth. The conveyor belt transports the fabric into the drying box. The sta
The waste heat recovery equipment of the setting machine (gas -to- air heat exchange) makes full use of the efficient heat transfer performance of the heat pipe. The waste heat flue gas discharged fro
