It should be noted that when the work is finished, the on-site staff should properly adjust the tail nut of the cylinder of the cloth outlet roller at the tail of the stenter setting machine to keep t
We know that during the operation of the stenter setting machine, it is necessary to reasonably control three important process requirements, namely temperature, time and pressure. In the stenter dryi
In actual operation, it is mainly to first soak the fabric in the trough with chemical materials, and after being uniformly squeezed by the rolls, it is sent to the oven of the stenter setting machine
In the process of operating the stenter setting machine equipment, firstly, the textile articles with sizing are sent into the equipment through the edge stripper, and then the machine automatically h
The time required for heating and heat penetration depends on the performance of the heat source, the weight per unit area of the fabric, the thermal conductivity of the fiber, and the moisture conten
The tension on the fabric during the heat setting process of the stenter setting machine has a certain influence on the quality of the setting, including the dimensional thermal stability, strength an
Stenter setting machine Because after the fabric is heat-set, the extent to which the existing wrinkles are eliminated, the surface smoothness is improved, the dimensional thermal stability of the fab
For the stenter setting machine, click the exhaust fan icon in the upper left corner or upper right corner to enter the exhaust fan power setting window, click the manual control button and confirm, c
After the stenter setting machine has processed the cloth, introduce the guide cloth to the operating table, tear off the guide cloth, click the main cloth feeding control button to red, and turn off
Application of Permanent Magnet Synchronous Motor in Stenter Setting Machine With the development of the textile printing and dyeing industry, various new materials and new fabrics are
The main part of the stenter setting machine drives the warp shaft to rotate through the traction roller and rotates around the drafting shaft, so that the warp yarn moves longitudinally on the main s
Stenter setting machine is a kind of equipment used for fabric stretching and setting. Its principle is to use mechanical force to stretch the warp and weft yarns to a plane at the same time. This art
