It should be noted that when the work is finished, the on-site staff should properly adjust the tail nut of the cylinder of the cloth outlet roller at the tail of the stenter setting machine to keep the upper roller in a separated position. The main function of surface winding is to roll the finished fabric, and the suitable speed is 2-20 m/min.
When the stenter setting machine is wound, it can be carried out in different ways, such as manual, stop, and automatic three states. In manual mode, the machine speed is not controlled by the line speed of the main machine, and the operator can set the speed arbitrarily; in automatic mode, the line speed is slightly faster than that of the main machine, and the cloth surface tension can be adjusted by adjusting the winding speed. When it stops, the winding stops.
https://www.sunwinmachinery.com/
