For the stenter setting machine, click the exhaust fan icon in the upper left corner or upper right corner to enter the exhaust fan power setting window, click the manual control button and confirm, click the number box with a white background to pop up a small numeric keyboard to enter the required value and confirm. If you click the automatic control button and confirm, the exhaust fan will automatically adjust the power of the exhaust fan.
Click the number box showing the temperature in the oven simulation icon to enter the heating window, click the heating total to set the heating temperature, or set the heating temperature of each oven separately. When the heating temperature is below 90 degrees, click the small fire icon to heat, and when the heating temperature is above 90 degrees, click the high fire icon to heat and confirm.
Start the first half of the machine, turn on the needle protection entrance button to "1" after the cloth guide has passed the needle protection entrance, stop the machine when the cloth guide reaches the cloth overfeeding roller, and connect the guide belt with the cloth discharge part. Connected. Click the main control button of the cloth outlet mechanism to green, turn on the motors of the cloth outlet part to "1" (except the tension motor switch of the cooling cylinder), restart the machine, guide the cloth into the cloth outlet frame, and then stop. Turn on the cooling cylinder tension motor switch to "1".
https://www.sunwinmachinery.com/
