1 . Before shutdown, the cooling should be notified to the heat transfer oil furnace room. Then stop the operation of the circulating fan, open the door to cool down, and run the main engine and the top exhaust fan separately, and stop when the temperature drops by *80 °C , which can avoid uneven heating of the chain clips.
2 . Regularly check the heat transfer oil pipeline in the oven, and if there is oil leakage, it should be dealt with in time; the flying flowers in the machine should be cleaned before and after the shift, and the flying flowers and oil stains in the exhaust pipe should be cleaned regularly to eliminate fire hazards.
3 . Add a steam pipe to the exhaust duct at the top of the oven, which can use steam to cool down and extinguish the fire. When the temperature inside the machine is higher than 165 ℃ , the steam valve is in a normally open state; a wire mesh shield is installed on the heat sink to prevent flying flowers or fabrics from falling on the heat sink. cause burning.
4 . The car must be turned off when cleaning or refueling, and it is strictly forbidden to wipe the chain, brush the needle plate, and wipe the roller while driving to prevent fingers from being stabbed. When cleaning or repairing cars on or inside the aircraft, a stop sign must be hung on the operating table to prevent accidents caused by others driving.
https://www.sunwinmachinery.com/
