Nowadays, in the stenter setting machine , the non-woven material includes a conveying track and a suction fan to generate negative pressure under the conveying track. The conveyor track is interconnected by a plurality of brake tracks, and each track plate, Including a plurality of blocks arranged in the left and right direction, the small slab crawler runs on the small slabs of each track in the left and right direction, and is connected to the small slab crawler to form a spindle slidably connecting and rotating mechanism for the small guide rail in the plate Swipe left and right.
In the adjustment of the center of the current stenter setting machine, the voltage transmission mechanism is provided with an inlet and an outlet. The belt passes through the main body of the box, and the comb-tooth grid comb is inserted on the surface of the brush roller, in the center of the dust box. , The air outlet is set, and the air outlet is connected to the exhaust pipe of the fan. The cleaning mechanism also includes a driving mechanism to drive the roller brush and the electrostatic rubber roller to rotate. The extraction structure of the stenter setting machine is reasonable. The electrostatic rubber is arranged in the combined brush roller for dust removal and combing. The brush roller and the electrostatic rubber roller rotate continuously. The textiles are thoroughly cleaned and have little effect on the tension of the conveyor belt.
Since the stenter setting machine is in use, the upper end of the main body of the adjusting nut is provided with a mouth fastener, and the lower end of the main body of the adjusting nut is provided with a connection from the top to the elongated nut, the lower part of the main body adjusting nut and the main body, There are a plurality of holes for adjusting screws. In the above manner, the length of the current adjusting nut screw can be extended, and the tightening strength is also greatly improved.
The cooling system of the current setting machine, including the fan adjustment device of the stenter setting machine, defines the cavity of the cuboid box. The middle box is fixed on the ventilation plate. The inlet is located in the left part of the box, and the outlet is located in the right box. The fan is horizontally fixed on the right side of the left wall of the box. The air volume control device includes a left and right adjustment device. The left adjustment device is set on the left grid to adjust the outlet of the ventilation pipe correctly.
https://www.sunwinmachinery.com/
