Today's stenter setting machine , including the entire centering system, is arranged under the frame of the frame, and on one side of the centering system, an automatic tension control is provided, and a system that is immersed in the shell from top to bottom and impregnated The shell is located below the system automatic tension control, the immersion shell is far from the pair, in terms of the center system, it is arranged on the platform, and the axis control system is located at the bottom of the platform, and the center is arranged on the platform from the immersion shell One side of the body.
The center system of the current stenter setting machine platform has a circulating air system with an energy-saving heat box, saving time and efficiency, and improving the manual opening of the sealed door to prevent heat loss from the oven, so the operation is now highly automated and stable, and It has good sealing performance and can effectively reduce heat loss during the operation of the furnace. Now it is a system for the exit of the stenter setting machine with a short process of rapid cooling device. It adopts a new structural design and introduces a ring structure with Longitudinal elliptical path, its design is different for each type of cooling device, until when it is on the other side of the horizontal line relative position.
For the two synchronous speeds, in the control module of the sheet cooling device, the telescopic electronic button corresponding to the control lever is controlled, so that the sheet is combined with the edge of the edge to establish a flexible circle to execute the horizontal fabric of the pipeline, and in the same Time, according to the job control micro air pump, high-speed and high-pressure are directly applied to the surface, so that the air flow control the stenter setting machine, and the heat of the non-woven fabric is removed, so that the operation is performed and cooled to the efficient stenter setting machine.
Now the overall operating efficiency of the stenter setting machine has been improved. A new structural design is adopted, and the ring structure of the longitudinal elliptical path is introduced. By designing their respective cooling devices for the ring structure, they move along the elliptical path to the position of the fabric at the horizontal line. , Effective cooling operation and overall operation, so that the efficiency of the stenter setting machine is improved.
https://www.sunwinmachinery.com/
