Noise is a nuisance problem, especially in laundry areas close to residential areas. If the noise is too large, it will affect the work and life of the occupants.
Compared with the previous products, today's towel dryers have improved a lot in quiet performance, and there is no obvious flaw in product quality and design, so the noise may come from the following reasons:
1, the drum shakes, this is caused by the aging of the machine, if you do not pay attention to maintenance, there will be a safety accident, light, will destroy all the clothes, heavy, may hurt the operation of the person, give people and property Bring no unnecessary losses.
2, the ground is not flat, the foot does not have good contact with the ground, just like the table is not flat. At this time, you should choose a flat, adjust the center of gravity, or add a foot pad on the four feet to maintain balance.
3. The motor bearing or the rotating shaft is worn or chipped. This needs to be replaced by a professional or handled according to the specific conditions.
4. Friction occurs when running between the inner and outer cylinders. In this case, the drum may be deformed or the spindle may be loose. The spindle can be tightened or the adjustment inner cylinder can be replaced, which requires professional handling by the manufacturer.
5, the equipment used for a long time, due to long-term work, internal parts aging, mechanical wear. Lack of lubricating oil, fatigue deformation of springs, etc.
6. The drive belt is slack. At this time, the belt tensioning device on the machine can be used to tension the belt.
7. For other reasons, the sealing ring is too tight, the internal parts are loose, or the balance boom is out of balance.
