In the process of operating the tenter setting machine, firstly, the textile article with the shaping is fed into the device through the flat stripping device. After the machine is finished, the machine automatically attaches the two ends of the cloth to the needle plate, and the two ends of the needle plate With the mechanical operation, the step is taken into the oven of the tenter setting machine, and the oven is heated by electric and the fan is blown.
In this way, after continuous constant temperature oven treatment in different temperature intervals, destatic treatment is carried out, and then the swing falls into the cloth, and a crisp and beautiful cloth is obtained. For the time being, tenter setting equipment is usually used for chemical fiber products such as polyester.
The reason why these items are to be shaped is mainly to improve the hand feeling, slip, color, width, strength and appearance of the textile by means of the shaping action of the tenter setting machine. Especially for non-pure cotton products, it can also play a role in stabilizing the size.
In the actual operation, the fabric is first immersed in the material tank in the trough, and after being uniformly pressed by the rolls, it is sent to the oven of the tenter setting machine. When the cloth passes through the oven, it will be dried and shaped under the action of high temperature hot air, and the cloth after the setting has a good hand feeling and a stable size.
In the stentering unit, there are a number of different components, of which the hot air circulation bellows is an important component. Generally, it is equipped with hot air circulation windmills, heat exchangers, drying or styling cloth. During the operation, the adjustment of the web is achieved by adjusting the width adjustment mechanism.
