The sizing machine wrapped roller belt is used on the cloth exit guide rollers of various textile, weaving, printing and dyeing industry equipment, and can be used to increase the surface friction. Their biggest feature is non-slip, wear-resistant, oil-resistant, acid-base and high-temperature resistance. The surface texture of each model is good and the texture is clear and beautiful. Rough rubber is used as the raw material, and all indicators must meet the requirements of non-slip and wear-resistant.
There are also many types of roller belts for the setting machine, including orange leather, table tennis, granular, flannel, green flannel, black flannel, soft leather, and so on. If you need to use strong abrasion resistance, you can choose the rough orange peel type for the best abrasion strength. They all use specially treated fabric as the framework material, and various patterns are pressed on the surface. The wrapping roller belts used by all kinds of machines are different. The black short pile series are commonly used in stenter setting machines and warp knitting machines, followed by cloth inspection machines, rapier looms, and sanding machines .
The material of the roller belt of the setting machine is irregular, rough, and prickly like a small stone. Natural rubber, artificial rubber, polyurethane pu, and polyvinyl chloride pvc are made through multiple processes such as melting and mechanical molding. The back of the rough bread roll belt is mainly made of polyester cloth, cotton cloth, and polyester fiber. It is bonded with glue and formed at one time. The roll material is generally two-meter width, and it is processed into different specifications according to different needs. Wrapped roller belt, easy to use. Rubber matte belts of commonly used materials on laminating machines and slitting machines cannot be used. This requires the use of cork tape. In the past, the film was slippery due to the smooth guide rollers during the rewinding, slitting, and printing processes. In the process of roll and slitting, the film tension is uneven, and the printing overprint is not accurate. The traditional method is to encapsulate the guide roller or use other methods to increase the friction of the guide roller to prevent slipping. This method requires professional manufacturers to process the guide roller to complete this work. The reverse side of the cork tape is coated with a special pressure-sensitive adhesive, which can be directly wound on the guide roller and firmly adhered to the guide roller of the equipment, which is easy to operate. There are many styles of sizing machine wrapped roller belts, and it is not possible to illustrate the differences of each one one by one. When choosing a rough surface belt for the machine, you can first inform the specific requirements for the rough surface belt, and then you can choose a suitable machine rough surface tape.
https://www.sunwinmachinery.com/
