If abnormal problems are found during the inspection, they must be dealt with in time, and they can be used only after the problems are solved. It is strictly forbidden for the fabric machinery to work with problems. Then according to the specific work requirements, set the appropriate temperature and turn on the equipment in turn. Moreover, when the stenter machine is in the running state, as a staff member, it is also necessary to pay more attention, not only to observe the working status of the tenter machine for Woven Fabric and setting machine equipment in time, but also to make appropriate adjustments according to the actual situation to meet the actual production situation, so that The device is always in a stable state. At the same time, make sure that the safety shield is intact to avoid accidents. We need to be prepared for downtime when work is nearly done. Please remember that we need to send the cooling notice to the oil furnace room before shutting down the stenter. Then turn off the fans and turn them on for cooling. At this time, when the temperature drops to 80 degrees Celsius, the equipment can be turned off to avoid the problem of uneven heating, so as not to affect the processing effect. If you don’t understand something, you can call us at any time for consultation. After entering the official website, you can see the contact method, and you can also consult the online staff. It will help everyone to solve some problems in the quotation method.
https://www.sunwinmachinery.com/
