I believe that when you wash clothes in daily life, you are very distressed about the color fading of clothes. There are two reasons for this. The first is that the dyes are not very good, and the printing and dyeing are not done well. Today, I will take you to understand the printing and dyeing. The composition and characteristics of the machine also allow us to have a general understanding of the printing and dyeing process of fabrics.
First look at the composition of the printing and dyeing machine.
1. The entrance frame and width limiter of the printing and dyeing sizing machine can help the cloth guide to unfold and correct the cloth, and can choose the upper and lower positions to enter the cloth;
2. The composite center corrector (fabric guide) has the functions of guiding the cloth and correcting it;
3. The sizing machine (roller) presses the water for sizing;
4. Speed compensation device (displacement detection wheel), which can control the tension between the sizing machine and the printing and dyeing setting machine;
5. The calibration of gauze can correct the arc in the yarn or cloth area;
6. The central control panel, all electrical adjustment functions are concentrated on the top of the inlet box, covering 95% of the operating functions of the whole machine;
7. Edge spreader and cloth tracker, responsible for spreading the edge of the cloth and tracking the edge of the cloth before loading the needle;
8. Entry box and retractable needle feeding device;
9. Needle/clip chain and track, using needle board or splint to transport cloth area to oven for drying;
10. Hot air circulation air box, install hot air circulation windmill, heat exchanger, dry the cloth area for drying or shaping;
11. Width adjustment machine, fabric width can be adjusted;
12. Exhaust system;
13. Cloth discharge device or cloth roll; There are two methods of cloth discharge: cloth or cloth roll.
https://www.sunwinmachinery.com/
