Under normal circumstances, every time the stenter setting machine equipment runs for a period of time, it needs to be lubricated and maintained. At the same time, due to the different lengths of running time, the specific measures taken are also different. Generally speaking, after the stenter setting machine has been running for 60 hours, the staff need to open the covers on both sides of the heating chamber to clean and lubricate the mechanical transmission parts.
It mainly refers to cleaning the main chain and gears of the stenter setting machine equipment, and then lubricating the gear shaft and other running parts. When the working time of the equipment reaches 100 hours, the staff need to open the covers on both sides of the heating chamber for inspection, mainly to check the specific conditions of the wires, circuits, heating pipes and connecting parts.
If during the inspection process, problems such as damage, aging or looseness are found, they should be dealt with in time. In addition, since the stenter setting machine equipment is an electric heating equipment, when processing chemical fiber fabrics, due to the influence of factors such as the environment, air and humidity, it may generate high static electricity. For safety, ensure that the body is installed with a reliable grounding wire.
https://www.sunwinmachinery.com/
