We know that once the stenter machine runs side problems, then the consequences are often very serious. So after finding out the specific reasons, we must deal with them immediately so as not to cause more serious consequences. So, how to control it?
First of all, we should pay attention to observing the running state of the equipment when we operate the stretching finalizer.
During the operation of the stretching and setting machine, the stacking state of the cloth waiting for processing should be checked and adjusted in advance to ensure the stacking adjustment. In this way, the stability of the cloth can be guaranteed in the process of publishing.
Secondly, the staff should adjust the distance between the door width and the edge absorber properly according to the actual processing conditions, and at the same time adjust the pressure of the door.
Thirdly, when checking the fabric, the defective fabric should be selected in advance, so as to prevent the phenomenon of running edge caused by the rotten edge.
Fourthly, we also need to set a baffle or ruler wheel on the bar at the feeding end of the stretching and setting machine, so as to reduce the lateral change of the cloth surface, and at the same time, to sway left and right, so as to avoid running.
Fifth, the staff should operate the stenter machine correctly to ensure its stable operation as far as possible. In addition, the tension of the machine should be adjusted according to the tightness of the fabric structure. Keep in mind that excessive tension should not be used, otherwise rotten edges or running edges will appear. If the equipment is equipped with overfeeding bow at the same time, then pay attention to control overfeeding, so as to avoid needle removal and cause running. _______
Finally, we need to pay attention to the surrounding environment during the operation of the stretching and finalizing machine. For example, a larger screen can be used to solve the interference problem of the sudden wind. At the same time, equipment should be inspected and maintained regularly, and damaged parts should be replaced in time.
https://www.sunwinmachinery.com
