Generally speaking, in order to better ensure the normal operation of the fabric setting machine, as a user, in addition to paying attention to the operation method, you should also pay attention to the following specific content:
Operating tension control for fabric stentering machines. Usually, the feeding device of special equipment specifies the use of low tension. For example, during fabric setting for knitted fabrics, unwinding into the car, installation and use of expansion rolls before the pad car, and assembly of passive rolls after the rolling point are all related to the tension of the fabric. Therefore, the weft adjustment and centering devices should be used reasonably, and each device should be carefully checked to ensure low tension. Adjust immediately if necessary.
During normal operation of the fabric setting machine, in order to better maintain the symmetry of all the wide electromagnetic coil structures of the fabric and avoid problems such as fabric edge deformation, the overfeed control must be kept between 20% and 40%. In addition, since knitted fabrics are relatively loose before drying or setting, this link is very important to eliminate residual tension and reduce residual shrinkage.
https://www.sunwinmachinery.com/
