What are the precautions for using a multi-functional coating machine? You can find out more about it below. I believe that through the introduction of our multi-functional coating machine manufacturer, everyone can have a deeper understanding of this knowledge.
When cleaning, it is not allowed to clean or mix the needle valve of the multi-functional coating machine with other devices to prevent the needle valve from damaging the needle tip, and it is not allowed to poke other objects with the needle valve.
To avoid damage to the needle valve of the multi-function coating machine, even if the spray gun is not used for more than 24 hours, it must be cleaned. After using the paint every day, be sure to wash it with thinner, which will greatly increase the output and quantity. Strictly follow the operating instructions of conformal coating, curing oven, etc. equipment.
After painting every 24 hours, the paint inlet pipe of the spray gun of the multi-functional coating machine must be removed, and an appropriate amount of thinner should be sprayed by spray irrigation, and sprayed more than 10 times. Soaking, scrubbing, and other methods have been improved in reactivity, greatly increasing output power and quantity. Please strictly follow the operating instructions of conformal coatings, curing ovens and other equipment, care for and inspect equipment as required, and wear anti-static gloves carefully. In addition to the above sundries, the temperature is below 30 and away from open flames.
The multi-functional coating machine should be cleaned without using the spray valve gun for more than 24 hours, and the utensils used for painting should be cleaned with thinner every day after use. Multifunctional coating machines can meet current and future industrial needs. It is mainly used for the conformal paint, UV glue and other liquids in the product process to be accurately sprayed, painted, and dropped to the position of each product.
The multifunctional coating machine can be used to finish drawing lines, circles or arcs, etc. The multifunctional coating machine can be used in many operations such as LED operation, welding machine operation, automotive electronic operation, communication operation, etc. However, we must pay attention to the fact that the waste liquid after cleaning cannot be disposed of in a closed rubber bucket to protect the environment.
Among them, the spraying process of the multi-functional coating machine and the opening of the high-speed serial data flow technology are automatic mechanical equipment that specifically stop and control the fluid and apply the fluid to the surface of the product. The multi-functional coating machine is mainly used in the production process of the three-proof coating. Liquids such as UV glue are sprayed, coated, and dropped to the exact position of each product, which can be used to complete line drawing, circle drawing or arc drawing.
https://www.sunwinmachinery.com/
