When the tenter setting machine is in operation, the staff needs to adjust the "feeding speed" according to the size, thickness and embroidery density of the processed product. Usually, when the guide cloth passes through the heating area, it needs to be inserted into the cloth winding device. Note that the quality of the product should be checked at this time, and feedback should be made in time. If it is not suitable, it should be adjusted in time.
When the setting work is over, the heating switch of the equipment should be turned off ten minutes in advance. Then adjust its operation to a state of low-speed operation, and then wait until the temperature of the stenter equipment drops to about 80 °C before turning off the main power supply. It should be noted that when the equipment has been working for 60 hours, the covers on both sides of the heating box should be opened, the transmission parts should be checked and cleaned, and lubricating oil should be added according to the situation.
When the working time of the tenter setting machine reaches 100 hours, the staff needs to carefully check the wires, circuits, heating pipes and connection parts, etc., whether there are any problems such as damage, aging or loosening, and deal with them in time. Since the equipment belongs to electric heating equipment, when shaping chemical fiber fabrics, in order to ensure safety, reliable grounding should be ensured .
https://www.sunwinmachinery.com/
